4 Piston Front GTO Brembo Brake Bracket Kit

Description

This front bracket kit (aka ITSME4G63 Kit) allows you to bolt on 4 piston Front CTSV Brembo Calipers onto your GTO. An 18” wheel (stock GTO 18” wheels have very minimal clearance and might require a 3mm spacer, cases vary )is a minimum requirement for fitting the large 4 piston calipers. Bolt in design, retains use of stock gto brake lines. Made out of strong Aircraft Quality 6061-T6 Aluminum, Hard Coat Anodized for durability. Extreme Condition Track Tested. Engineered to work specifically for all model years (04-06). For Off-Road use only.

Difference between 4 piston CTSV & Camaro (MY 10-15) are larger caliper mounting threads (M14 on Camaro vs M12 on CTSV) requiring modification to the bracket in order to accept the Camaro caliper units; slight shipping delay might occur due to modifications

Note: Requires 2010-2015 MY (Gen5) Camaro SS front rotors (14”/355mm Diameter). Rotor needs hub clearance hole opened up to clear stock GTO hub. Rotor bushings are used to center rotor on wheel studs. Minor modification to splash-shields is required for bracket/caliper clearance.

Whats included in the kit:

Mounting Brackets – x2
Caliper Mounting Bolts – x4
Caliper Mounting Bolt Washers – x4
04 MY adapted bushings – x4
Rotor Bushings – x10

NOT INCLUDED IN KIT:
GM Caliper P/N’s for reference only
Silver – 89047726 & 89047727

Domestic shipping included.